|
|
|
Enomoto company, established in 1915, is well known internationally as major screw press company with best references of leading Japanese car manufacturers. |
Employees : |
25+ |
Year established : |
1915 |
Business : |
Manufacturer |
Economical screw-type vertical upsetting press (0026)
The Japanese engineers at Enomoto will be highlighting a screw-type, servomotor-driven upsetter. The configuration with one lower die that is raised with different forming power combined with two to three upper dies is said to provide optimal upsetting forging. The forming energy and ram strokes from the first stroke up to the third stroke are automatically converted to prevent buckling. According to the manufacturers, the forming program can be simply created in a few steps on the touch screen, whereby a memory for more than 200 types is available. Die costs can apparently be significantly reduced since all the dies are able to be freely re-sunk for modification. A transfer unit is not required. The exhibitors also draw attention to the simple knock-out-type of kick-out, the lack of maintenance required by the servomotor-driven systems, the easy fine adjustment of the projection length, and the capability of seamless pressing without burrs. Raw material diameters of 120 mm and lengths up to 1 meter can be used. With the machine, approximately 50 percent of the equipment cost can reportedly be saved in comparison with conventional mechanical horizontal upsetters.
| BF Super High-Speed Friction Screw Press Super High-speed Friction Screw Press of the series BF are the new type ones, based on our long term experience in this field.
In many aspects, this new type has high performance to compare with former friction press or hammer and mechanical forging press. |
| Screwpress |
| SMALL TYPE SERIES Super High-speed Friction Screw Press of the small series BF are the new type ones, based on our long term experience in this field.
In all aspects, this new type has high performance to compare with the former hydraulic control model. |
| Vincent type Friction Screw The design of Vincent type Friction Screw Press is based on our long term experience in this field. This machine has different mechanism from other type of friction screw presses, which the ram goes up and press the material. This machine is especially favorable for heading of the long material such as long hexagon headed bolt. | |
|
|