|
|
|
Obuvnícke stroje, Stroje na tvarovanie obuvi, Koželužnícke stroje, Obuvnícke stroje |
pracovníci : |
35 |
rok založenia : |
1993 |
typ obchodu : |
Manufacturer |
Dnes LEIBROCK sa nachádza v "srdci" nemeckej je obuvnícky priemysel v Pirmasens je jedným z posledných nemeckých spoločností Tradícia-pre výrobu inovatívnych a vysoko-kvalitné čistenie stroja "Made in Germany". Keďže takmer 40 rokov, LEIBROCK pracuje vo veľmi úzkom partnerstve so všetkými dôležitými topánky-výrobca a LEIBROCK stroje - vyvinutý a vyrobený stopercentný "in-house" v Pirmasens/Germany- sú veľmi dobre prijímané všade vo svete, kde topánky sú pokroku. Program vyrábaných strojov a dodáva LEIBROCK je veľmi rozsiahla, od stroja na výrobu zvrškov na stroje pre montáž topánky (trvalé a stlačená) až k dokončenie. Jednoduché výrobky, ako aj zložitých strojov v oblasti vyspelých technológií, napríklad ako je vysoká kapacita Automatické Roughers a Cementers sú súčasťou aktuálne a zaujímavý predaja-program. Okrem výroby strojov v sériách, LEIBROCK je vždy otvorený načúvať špeciálne požiadavky svojich zákazníkov, čo potom môže viesť k "made-to-order" stroje podľa špecifikácie jednotlivých klientov. Úspech LEIBROCK výrobnej jednotky v Pirmasens závisí na mnohých nástrojov, High-Tech CNC strojmi a pomocou tohto zariadenia, vysokú presnosť a perfektnú kvalitu vyrábaných súčiastok a dielov môže byť zaručená. Okrem toho, LEIBROCK má svoje vlastné hliníka-zlievareň a taktiež sekciu pre vulkanizáciu gumy-kusy a foriem. LEIBROCK, "House of Innovations" pre obuvnícky stroja je navyše extrémne orientovanej na služby a vždy sa snažíme reagovať rýchlo a nebyrokratické na požiadavky zákazníkov po nových strojov, nástrojov alebo zmeny existujúcich systémov. LEIBROCK - Partner na World-Wide obuvnícky priemysel vo vývoji a výrobe inovačných a trvanlivé výrobky!
| Backpart moulding machine model FFS 43 or FFS 43 K (K stands for cooling)
with look at collar to work on thermoplastic or lefa-backparts
With this machine that has some newnesses and some improvements highest quality is reached for either thermoplastic or lefa counters.
With - a compact pincer pull
- high pressure of the pressing pads
- wrinkle-free wiping-in in the area of the heel
- pecial pressing of the lasting margin
an optimal working result is achieved.
The length of the lasts is 80 mm, 90 mm, 155mm or 140 mm. This means that it is possible to work perfectly on gents, ladies, children shoes, as well as on security and heavy
walking shoes.
Serial equipment of the machine is:
- Activation unit for thermoplastic counters
- pneumatic time adjustment for all outer moulds
- pneumatic pressure regulation for outer moulds
- electronic heating control for outer moulds
- electronic heating control for inner moulds
- pneumatic time adjustment for outer moulds
- pneumatic pressure regulation for outer moulds
- cooling unit to work on themoplastic counters
- compact pincer pull
- maintenance unit
The machine can be equipped with:
- wipping in equpment for lasting margin
- special pressing for lasting margin
- height stop for lasting margin
- heated moulds for lefa counters
- Last can be heated or cooled
|
| Vamp moulding machine This machine is used to produce shoes which are, contrary to the usual way, not wiped over,
that means a connection to the insole will not become into existence. A premoulding of the vamps
is necessary to produce clogs or shoes made according to the “strobel-system”. This system means
that a textile insole will be stitched into the upper.
As leather is a natural product that differs in firmness, thickness and extensibility there will be
unevennesses by moulding that means the leather juts out of the last bottom area and gets wrinkles.
These facts cannot be accepted by the shoe-manufacturers.
| |
|
|