All across press

The mode of operation of the perforating tools that covers the full press width is characteristic of this type of press. Thus up to 8 rows of holes can be simultaneously punched with each stroke.

Expanded Metal Press

This type of press has been especially developed for the production of expanded metal articles. Special attention is paid through customised solutions to addressing the requirements on an expanded metal press such as the need to ensure minimal sagging of the press frame or play between the cutter and the eccentric shaft.

Perforating machines

The processing of the perforating zone in strips is characteristic of this type of press as the tools have a working width of only 250mm or 400mm. This means that a rectangular perforation field must be processed in several "strips". On the other hand, of course, punchers offer a higher degree of flexibility.

Special eccentric press

These presses have been especially developed for the production of long parts for makers of fittings. Depending on their design, the presses are suitable for both single track and double track operation. To this end the press can be fitted with two rams whose heights can be adjusted independently of each other (each track separately).